Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)
Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)
Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)
Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)

Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)

SNOSNO-50100

Regular price USD $1,458.35 Sale price USD $1,041.68 Save USD $416.67

/
Shipping calculated at checkout.

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all turbo diesel owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler? controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven diesel vehicles that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! This system is 50-State Legal! (C.A.R.B E.0.# D-723).

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.