Mishimoto Universal 34 Row Oil Cooler - Black
Mishimoto Universal 34 Row Oil Cooler - Black
Mishimoto Universal 34 Row Oil Cooler - Black
Mishimoto Universal 34 Row Oil Cooler - Black
Mishimoto Universal 34 Row Oil Cooler - Black

Mishimoto Universal 34 Row Oil Cooler - Black

MISMMOC-34BK

Regular price USD $421.54 Sale price USD $315.95 Save USD $105.59

/
Shipping calculated at checkout.

Maintaining appropriate oil temperature is key to extending the life of your vehicle’s engine. Your engine oil is specifically designed to operate within a certain temperature and pressure range, ensuring proper lubrication and reduced wear. When a vehicle is extensively modified or used in high stress driving conditions, it's easy to exceed the limits of your engine oil, resulting in reduced lubrication and higher potential for wear and damage. The simple addition of a performance oil cooler is an easy way to reduce temperatures and bring them back into the effective range for proper lubrication. Mishimoto engineers have designed this 34-row stacked-plate oil cooler to provide substantial heat transfer and reduced temperatures. This oil cooler includes eight universal mounting holes, providing an abundance of options for mounting on your vehicle. Each cooler includes -10AN inlet and outlet fittings, ensuring leak-free operation. Mishimoto 34-row oil coolers are available in silver, black, or gold powder coated finishes. Be sure to pair with our -10AN braided hoses and -10AN aluminum fittings to complete your oil cooler installation. As with all our products, this 34-row fluid cooler includes our Mishimoto Lifetime Warranty.

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.