Mishimoto Aluminum -10AN 45 Degree Fitting - Black
Mishimoto Aluminum -10AN 45 Degree Fitting - Black

Mishimoto Aluminum -10AN 45 Degree Fitting - Black

MISMMFT-SW-10-45

Regular price USD $18.68 Sale price USD $12.95 Save USD $5.73

/
Shipping calculated at checkout.

You’ve poured everything you have into your build. It is pure personal expression. Fully refreshed and upgraded suspension. Wheels and tires suited for your objectives. Track pads that squeal at every stop. Larger turbo for more power. But in the thrill of completion, you’ve muddled up the engine bay with a rat’s nest of rubber lines. The smell of burnt rubber emanates as a rubber line sizzles next to the exhaust manifold. Oil stains reveal that your rubber PCV hose has been rubbing on an intake bracket, causing a rupture. You gaze over to the reused stock 20-year-old rubber fuel lines. Hairline cracks in the exterior rubber layer threaten to put a fiery end to this incredible machine. It’s time to upgrade your engine bay with Mishimoto -AN braided lines and fittings. Mishimoto has released an extensive lineup of -AN line fittings, unions, reducers, and adapters to help complete your project.Mishimoto -AN line fittings feature furnace brazed tubing and ends made from precision CNC-machined durable 6061 aluminum. Each fitting features a corrosion-resistant anodized finish, providing a very sleek yet subtle appearance. Mishimoto -AN line ends feature a full 360-degree swivel, making routing and final install a breeze. Mishimoto -AN aluminum adapters and reducers make transitioning to other line sizes and types painless. Our braided line fittings are engineered to withstand substantial abuse, including extreme temperatures and high pressure. Whether you’re building an oil cooler setup or putting together a turbocharger oil drain, trust Mishimoto -AN line fittings to get the job done right. As with all our products, Mishimoto -AN fittings include our signature Mishimoto Lifetime Warranty.

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.