Mishimoto 18+ Audi B9 S4/S5 Baffled Oil Catch Can- PCV Side

Mishimoto

Mishimoto 18+ Audi B9 S4/S5 Baffled Oil Catch Can- PCV Side

Name: Mishimoto 18+ Audi B9 S4/S5 Baffled Oil Catch Can- PCV Side
Brand: Mishimoto
SKU: MISMMBCC-S4-18PBE
Price: 377.95 USD
Availability: InStock

MISMMBCC-S4-18PBE

USD $443.01 USD $377.95 Save USD $65.06

Shipping calculated at checkout.

Give the 3.0T TFSI powering your 2018+ Audi S4 or S5 the extra layer of defense that it needs with the Mishimoto Direct Fit Baffled Oil Catch Can. Volkswagen and Audi were on the front lines of the direct injection revolution, which means they were also one of the first to implement a means to protect against blow-by gasses. While the factory AOS system does filter out some oil and fuel vapors, the harmful contaminants still make their way to the intake valves. The Mishimoto Direct-Fit Baffled Oil Catch Can Kit for your 2018+ Audi S4/S5 installs in line with the PCV system right after the factory separator for immediate protection of the intake components. Our catch can features a patent pending 2-port Compact Baffled Oil Catch Can with a 50-micron bronze filter and an internal baffle to better separate oil from the crankcase vapors. Our kit also includes a set of direct fit hoses for a simple installation, including two Mishimoto One-Way Performance Check Valves to prevent your catch can from becoming pressurized. In order to simplify servicing, our kit includes a petcock drain kit, so draining captured blow-by is a cinch. The Mishimoto 2018+ Audi B9 S4/S5 Direct Fit Catch Can Kit also includes the Mishimoto Lifetime Warranty for a worry-free installation. Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

This Part Fits:

Year	Make	Model	Submodel
2019-2021	Audi	S4	Premium
2018-2021	Audi	S4	Premium Plus
2018-2021	Audi	S4	Prestige
2019-2021	Audi	S5	Premium
2018-2021	Audi	S5	Premium Plus
2018-2021	Audi	S5	Prestige

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components. Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

Turbochargers
Exhaust Manifold
Downpipe
Catalysts
Exhaust System
Intake Manifold
Silicone Plumbing
Intercoolers
Fuel Pump
Fuel Injectors
Brake Calipers
Haldex Controller

Components NOT covered by warranty include:

Clutch
Gearbox
Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed	1000 km / 620 miles
Mass Air Flow meter – Clean	5000 km / 3100 miles
Mass Air Flow meter – Replace	20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace	5000 km / 3100 miles
Haldex Fluid & Filter – Replace	10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair.

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure. Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.