KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L
KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L

KW Electronic Damping Cancellation Kit BMW 5series F10 Type 5L

KWS68510213

Regular price USD $583.95

/
Shipping calculated at checkout.

Cancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically adaptive dampers. KW is the only manufacturer that offers the solutions where the serial damper regulation is shut down and at the same time trouble codes avoided. The functioning of the of the control unit remains completely intact. The ESC modules prevent error messages when changing the suspension and the standard damper control is disabled and while at the same time, error messages are prevented. The function of the control unit is fully retained.

This Part Fits:

Year Make Model Submodel
2011-2016 BMW 528i Base
2012-2016 BMW 528i xDrive Base
2014-2016 BMW 535d Base
2014-2016 BMW 535d xDrive Base
2011-2016 BMW 535i Base
2010-2013 BMW 535i GT Base
2011-2013 BMW 535i GT xDrive Base
2011-2016 BMW 535i xDrive Base
2011-2016 BMW 550i Base
2010-2013 BMW 550i GT Base
2010-2013 BMW 550i GT xDrive Base
2011-2016 BMW 550i xDrive Base
2013-2018 BMW 640i Base
2014-2018 BMW 640i xDrive Base
2013-2018 BMW 650i Base
2013-2018 BMW 650i xDrive Base
2011-2015 BMW 740i Base
2011-2012 BMW 740Li Base
2009-2015 BMW 750i Base
2010-2015 BMW 750i xDrive Base
2009-2012 BMW 750Li Base
2010-2012 BMW 750Li xDrive Base
2010-2012 BMW 760Li Base

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.