KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1
KW

KW BMW M340i xDrive G20 AWD Sedan Without Electronic Dampers Coilover V1

KWS102200DK

USD $1,924.00

/
Shipping calculated at checkout.
The KW Variant 1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers. The result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite Adjustment -ollar. KW Variant 1 INOX-LINE coilover rewards the sporty driver with its pre-configured setup. For each vehicle, our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW fine tune each application on the Nurburgring Nordschleife and at the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology -hat was all developed in-house. With the KW Variant 1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers made in Germany. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.

This Part Fits:

Year Make Model Submodel
2022-2023 BMW M240i xDrive Base
2020-2023 BMW M340i xDrive Base

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.