iABED Billet Aluminum Rear Main Seal Upgrade
iABED Billet Aluminum Rear Main Seal Upgrade
iABED Billet Aluminum Rear Main Seal Upgrade
iABED Billet Aluminum Rear Main Seal Upgrade
iABED Billet Aluminum Rear Main Seal Upgrade
iABED Billet Aluminum Rear Main Seal Upgrade

iABED Billet Aluminum Rear Main Seal Upgrade

462-103-171F

Regular price USD $119.00
/

Do you own a 2.0T TSI powered VW or Audi? Do you have a engine stumble or misfire, check engine light or mysterious oil leaks in the driveway? There's a good chance your rear main seal and PCV valve are failing. Don’t replace it with another part from the dealer that is known to fail. iABED Industries has developed an upgraded solution to permanently fix your rear main seal. The most common cause of rear main seal failure is a faulty PCV valve. The TSI engine is known to have PCV valve failures, which will cause an excess of crankcase pressure. This is more pressure than the rear main seal can handle. PCV issues can surface with multiple symptoms or virtually none at all.

The factory stamped unit uses a flimsy and very thin rubber surface to seal around the crankshaft. The crank is constantly spinning inside this seal too so over time as heat cycles are put through the engine, the rubber will expand and contract and become brittle, especially when it is constantly saturated with oil. iABED's replacement solution uses a patented billet machined plate that is bored to a larger diameter so that a Viton rubber seal can be used. The Viton seal is more heat resistance, fluid resistant, and more than twice as thick.

iABED Industries was founded by Issam Nicholas Abed in 2004. In the humble beginnings , Issam was known as I.N.A. Engineering Inc. which was a small web based company offering CAD/CAM services assisting in the design and prototyping field to accommodated companies in the industry. Since inception, the company has grown from design to manufacturing and in 2015 iABED Industries was formed as a parent company which better displayed the skill set offered by Issam.

This Part Fits the Following Vehicles

Make Model Submodel Engine
Audi 8U Q3 FWD 2.0T
Audi 8U Q3 Quattro 2.0T
Audi 8V S3 Quattro 2.0T
Audi A3 8P FWD 2.0T
Audi A3 8P Quattro 2.0T
Audi A3 8V FWD 1.8T
Audi A3 8V FWD 2.0T
Audi A3 8V Quattro 2.0T
Audi B8 A4 FWD 2.0T
Audi B8 A4 Quattro 2.0T
Audi B8 A5 Quattro 2.0T
Audi B8 Allroad Quattro 2.0T
Audi B9 A4 FWD 2.0T
Audi B9 A4 Quattro 2.0T
Audi C7 A6 FWD 2.0T
Audi C7 A6 Quattro 2.0T
Audi MK3 TT (2014+) Quattro 2.0T
Audi Q5 Quattro 2.0T
Volkswagen All All 1.8T Gen3
Volkswagen All All 2.0T Gen3
Volkswagen All All 2.0T Gen3 GLI
Volkswagen Beetle All 2.0T
Volkswagen CC FWD 2.0T
Volkswagen EOS All 2.0T
Volkswagen Golf V All 2.0T
Volkswagen Golf VI All 2.0T
Volkswagen Jetta V All 2.0T
Volkswagen Jetta VI Sportwagen 2.0T
Volkswagen Jetta VI Sedan GLI
Volkswagen Passat B6 FWD 2.0T
Volkswagen Tiguan 1 4 Motion 2.0T
Volkswagen Tiguan 1 FWD 2.0T
Volkswagen Tiguan 2 4 Motion 2.0T
Volkswagen Tiguan 2 FWD 2.0T

Our Policies

PRICING

Prices on website are reflected in US Dollars and are applicable for orders within Canada and USA only. Inquiries from outside of North America may be subject to different prices. Please contact our sales team for further details. Prices are subject to change without notice.

METHODS OF PAYMENT

For domestic orders (Canada and United States), HPA accepts payment via PayPal, Visa, or Mastercard for most items. All International orders and all domestic Turbo Systems and Custom Vehicles must be paid via Bank Transfer.

SHIPPING

Unless otherwise noted or requested, HPA ships via UPS. We are unable to ship to PO Boxes. For security purposes, HPA Motorsports will ship only to the verified billing address of the credit card used.

INTERNATIONAL ORDERS

Brokerage, Duty, or VAT may be imposed by the importing country, and these charges will be the sole responsibility of the recipient.

CANCELLATIONS

Order Cancellations are subject to a 10% processing fee.

RETURNS

All returns must be approved by HPA Motorsports. NO RETURNS after 30 days from your order date. All returned goods must be in brand new, un-used, un-installed condition in their original packaging. Shipments will not be accepted without a Return Merchandise Authorization (RMA) number and must be shipped freight pre-paid. Any brokerage fees incurred by HPA to receive returned goods will be billed back to the customer. NO REFUNDS on electrical, special order, used, or non-stock items. A restocking fee of 15% will apply to all returned items.

SPECIAL ORDERS

All Special Order items including Custom Vehicles, FT-series Turbo Systems, Non-Stock items, etc., require a Non-Refundable deposit of 70% upon booking order. Balance is due prior to release of shipment.

SHIPPING DAMAGE

All orders are shipped insured against loss or damage in transit. It is important that you inspect your package with the driver present and denote any suspected damage at time of delivery. Damage should be reported to the carrier immediately.

ACCOUNTABILITY

HPA Motorsports Inc. is accountable and responsible for personal information under its control and has designated a Privacy Officer who is accountable for compliance with this Policy.

PURPOSES

At HPA Motorsports Inc., we collect, use, and disclose Personal Information to provide you with the services you have requested and to offer you additional products and services we believe you might be interested in.

Personal Information may include your name, address, birthday, personal identification numbers, vehicle information, credit card or banking information, transaction details, etc.

CONSENT

Personal Information will only be used for the purpose for which it was collected and will not be disclosed to any outside parties without your explicit consent, except when permitted or required by law, for example; in relation to criminal investigations or government tax reporting requirements.

LIMITS ON COLLECTION AND USE OF PERSONAL INFORMATION

HPA Motorsports Inc will limit collection of information to that which is reasonable and necessary to provide the products and services you have requested.

In the course of daily operations, access to private, sensitive and confidential information is restricted to authorized employees who have a legitimate business purpose and reason for accessing it. All employees and independent contractors of HPA Motorsports Inc. are informed about the importance of privacy and are required to abide by the privacy standards we have established.

ACCURACY

HPA Motorsports Inc. will make a reasonable effort to ensure that Personal Information it is using or disclosing is accurate and complete. In some cases, HPA Motorsports Inc. relies on you to ensure that certain information, such as your address or telephone number, is current, complete and accurate. Should you identify any incorrect or out-of-date information in your file, HPA Motorsports Inc. will amend the information as required and, if appropriate, will send the amended information to third parties to whom the information has been disclosed.

SAFEGUARDING YOUR INFORMATION

HPA Motorsports Inc. protects the Personal Information in its custody or control by making reasonable security arrangements to prevent unauthorized access, collection, use, disclosure, copying, modification, disposal or similar risks. Electronic customer files are kept in a secure password protected environment, and paper-based files are stored in locked filing cabinets.

COMPLIANCE

Any inquiries, complaints or questions regarding this Policy should be directed in writing to the HPA Motorsports Inc. Privacy Officer at 100 – 10185 199B Street, Langley BC V1M 3W9.