GEN 5 Performance Haldex Controller
GEN 5 Performance Haldex Controller

GEN 5 Performance Haldex Controller

haldex.g5.Neutral

Regular price USD $1,249.00

/
Shipping calculated at checkout.

Note: Please contact us with your vehicle application after checkout as these will need to be individually coded for your car's make, year, and model if your vehicle is not coded by default. Refer to chart below.

We are proud to announce the release of the Gen 5 Performance Haldex controller developed for VAD MQB Platform.

Features:

  • Direct bolt on replacement for the OEM unit.
  • Increased torque transmission during active driving for a sportier and more controlled behavior.
  • Faster torque transfer reduces initial understeer on power-up during active driving.
  • Active drift mode gives the driver better control of the vehicle when driving in high lateral accelerations.
  • Does not limit the torque transfer to the rear at higher speeds.
  • Increased traction from launch.
  • SW for performance mode is developed and optimized for daily driving and dynamic/active driving without compromises and not risking damage of driveline components.


Application:


For all VAG MQB vehicles with  Haldex AWD except Audi RS3,TT,TTRS,TTS.

Performance controller 2022060 is compatible with following OEM ECU’s part no. Please double check your OEM ECU's part number to ensure compatibility.

0CQ 907 554 D ( Sw 7076,7082)

0CQ 907 554 H  ( Sw 7083)

0CQ 907 554 J ( Sw 7084)

VW Years
Tiguan  2016-2022
Passat  (B8) 2015-2022
Arteon 2017-2020
Golf VII R* 2015-2019
Golf VII sportcombi* 2013-2022
Golf Alltrack/Sportwagen* 2017-2022
T-Roc 2018-2022
Atlas 2018-2022
Audi
A3  Quattro  ( 8V)* 2015-2020
S3   Quattro (8V)* 2015-2020
Q3 Quattro  2019-2022
RS3 Not Available
TT Not Available
TTRS  Not Available
TTS Not Available
Skoda
Oktavia 4x4* 2013-2022
Kodiac 4x4 2017-2022
Superb 4x4 2015-2022
Karoc 4x4* 2017-2022
Seat
Leon 4Drive* 2013-2020
Terraco 4Drive 2018-2020
Ateca 4Drive* 2018-2020
*Default Coding - No No Need to Contact HPA

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.