AWE Tuning S-FLO Breather Filter VW/Audi 2.0T
AWE Tuning S-FLO Breather Filter VW/Audi 2.0T

AWE Tuning S-FLO Breather Filter VW/Audi 2.0T

AWE2710-11016

Regular price USD $23.16 Sale price USD $22.00 Save USD $1.16

/
Shipping calculated at checkout.

The AWE No Check Engine Light Guarantee offers peace of mind against the appearance of Check Engine Lights when products are installed properly and used as intended, on vehicles with no additional modifications (with the exception of other AWE products intended to work with the product in question). No problems, no lights. Easy.

This Part Fits:

Year Make Model Submodel
2015-2018 Audi A3 Premium
2015-2018 Audi A3 Premium Plus
2015-2018 Audi A3 Prestige
2015-2016 Audi A3 TDI Premium
2015-2016 Audi A3 TDI Premium Plus
2015-2016 Audi A3 TDI Prestige
2015-2018 Audi A3 Quattro Premium
2015-2018 Audi A3 Quattro Premium Plus
2015-2018 Audi A3 Quattro Prestige
2020 Audi S3 Premium
2015-2020 Audi S3 Premium Plus
2015-2019 Audi S3 Prestige
2016-2018 Audi TT Quattro Base
2016-2019 Audi TTS Quattro Base
2016 Volkswagen Golf Base
2015 Volkswagen Golf Launch Edition
2015-2018 Volkswagen Golf S
2015-2016 Volkswagen Golf SE
2015-2016 Volkswagen Golf SEL
2017 Volkswagen Golf Wolfsburg Edition
2017-2019 Volkswagen Golf Alltrack S
2017-2019 Volkswagen Golf Alltrack SE
2017-2019 Volkswagen Golf Alltrack SEL
2015-2019 Volkswagen Golf R Base
2016 Volkswagen Golf SportWagen Limited Edition
2015-2017 Volkswagen Golf SportWagen S
2015-2017 Volkswagen Golf SportWagen SE
2015-2017 Volkswagen Golf SportWagen SEL
2015-2020 Volkswagen GTI Autobahn
2019 Volkswagen GTI Rabbit Edition
2015-2020 Volkswagen GTI S
2015-2020 Volkswagen GTI SE
2017 Volkswagen GTI Sport
2019-2020 Volkswagen Jetta GLI Autobahn

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.