4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7

HVA-246

Regular priceUSD $1,799.00
/
Shipping calculated at checkout.
  • Free Standard Ground Shipping to Continental USA & Canada

  • Available To Order
  • Available To Order

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7
4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7
4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7
4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7
4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7
4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7
4.0T Turbo Cartridge Upgrade - Pair - Audi S6-S7-A8-S8-RS6-RS7

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.

RS7 Power for your Audi

4.0T RS7 Turbo Upgrade

Upgrade your Audi S6/S7/A8 to RS7 turbos without having to replace your entire turbo. HPA offers RS7 turbocharger cartridge and compressor housing upgrades to shorten installation time and save money! HPA’s solution is a natural power upgrade for Audi S6/S7/A8. Paired with the right fueling and tune, this package can deliver over 600HP and 600FT-LBS of torque. Own a RS7 or S8? This is a direct replacement for your failed OEM turbos!

OEM QUALITY
Our Audi 4.0T turbo parts are made with the highest quality OEM service parts. That means OEM quality without buying the complete turbocharger from the dealer - an over 50% savings in cost!

BOLT-ON FITMENT
HPA’s solution replaces the super core of your OEM turbocharger. The exhaust manifold and turbine housing stay in place during the installation process. This means better priced parts and less labor.

REPLACEMENT COMPRESSOR COVERS
We provide custom compressor covers for a quick and simple installation

Did you know there is an AUDI Technical Service Bulletin for your 4.0 TSI?

The turbos on the 4.0TFSI platform have been known to fail due to a faulty design in the original oil screen and check valve. If you have experienced a Turbo failure the restricted oil supply is most likely the cause. If your OEM turbos are still good and you are replacing them for a power upgrade, you should still perform the Technical Service Bulletin 20592581 as preventative measure.

Make sure to perform the recommended Audi TSB 20592581 to address the root cause of the turbo charger failure. We also recommed flushing the intercooler to ensure there are no foreign particles in your car's air tract.

Download TSB

Use the recommended engine oil as specified by Audi for your climate. Your local Audi dealer should be able to provide you with the correct details based on your car's VIN.

Your first oil change after completing the TSB and turbo upgrade / replacement should be performed at 5000 miles. Regular maintenance after this service needs to be performed in order to ensure proper oil flow to the turbochargers.

NOTE: These steps must be performed otherwise the warranty on the turbos will not be applicable. As a best practice, keep the records of your TSB service and photos of the installation for your reference.

HPA RS7 Turbo Upgrade

Marcel reviews the RS7 Turbo upgrade for the 4.0 TFSI

Recently viewed