HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components. Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.
Warranty is offered to original purchaser only and is not transferable.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
Labour and freight costs associated with warranty repair or replacement are NOT covered.
To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.
In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:
Components covered by warranty include:
- Turbochargers
- Exhaust Manifold
- Downpipe
- Catalysts
- Exhaust System
- Intake Manifold
- Silicone Plumbing
- Intercoolers
- Fuel Pump
- Fuel Injectors
- Brake Calipers
- Haldex Controller
Components NOT covered by warranty include:
- Clutch
- Gearbox
- Brake Pads & Brake Rotors
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:
Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed | 1000 km / 620 miles |
Mass Air Flow meter – Clean | 5000 km / 3100 miles |
Mass Air Flow meter – Replace | 20,000 km / 12,500 miles |
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace | 5000 km / 3100 miles |
Haldex Fluid & Filter – Replace | 10,000 km / 6000 miles |
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair.
For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure. Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.
One device for performance metrics, diagnostics, data logging, and more.
Developed and made in Germany by CANchecked, HPA Motorsports is excited to offer a new line of VADpro Versatile Automotive Displays to the enthusiast market.
Performance Monitor
High speed CAN integration gives you access to up to 64 vehicle sensors that you can display in real time. Swap sensors on the fly using the 2.8" touchscreen and set up custom ranges and warning pop-ups using the DSS software.
Diagnostics
Swipe down from any page to diagnose malfunctions on the fly. VADpro can read, diagnose, and erase codes on engine, ABS, Transmission, ESP, TPMS and other systems.
Data Logging
Easy access to log on demand and save to the internal SD card.
Plug and play installation
VADpro is precision designed and integrates perfectly with your vehicle's interior and retains the functionality of your car's vent.
Expandable functionality
4 Analog + 2 Digital Inputs allow you to monitor third party sensors and devices.
Future licences in development will unlock Haldex, Water Methanol, Ethanol Fueling integration.
customizable screens
VADpro comes with six pre-loaded dashboards. A total of ten can be customized using the included software and library of widgets.
VADpro can display up to ten pages and has access to 64 of your vehicle's sensors. Use the touch screen to navigate between each page and choose which sensor you want to display. Need more customization? You can personalize your views by changing the graphics, sensors and widgets using the provided DSS software. We've pre-loaded some examples on your VADpro to get you started.
Daily Driving
Large boost gauge and three sensors of your choice.
Track Day
Tachometer with large gear display. Set your shift light with our DSS software or connect one of our LED shift light accessories.
Performance Meter
Measure your 0-60mph, 0-120mph, and 60-120mph times
Logging Basics
See how your car is running at a glance.
Logging Air
Everything you need to monitor your air flow.
Logging Fuel
Your key fueling data at a glance.
Vehicle Diagnostics
Swipe down from any page to diagnose malfunctions on the fly. VADpro can read, diagnose, and erase codes on engine, ABS, Transmission, ESP, TPMS and other systems.
The preset dashboards are great start but I love how the customizability is endless... I can set up my dashboards, graphics, sensors, everything the way I want them!
Jonathan, Langley BC
It's the perfect pairing with the turbo upgrades we sell to our customers. Giving our customers the ability to monitor the performance and health of the car is great peace of mind.
Marcel, HPA Motorsports
Awesome! It matches my interior perfectly and the gauges match my digital dash. Looks like it could have been there from the factory.
Geoff, Vancouver BC