K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP
K&N Engineering

K&N Universal Apollo Black Cold Air Intake - 70mm OD FLG PP

KNNRC-5052AB

USD $249.99

/
Shipping calculated at checkout.
K&N's APOLLO CIS is a universal "Cold Air Intake System". The Apollo's specially designed shape increases volumetric efficiency and is made of durable lightweight material for cooler air intake. The Apollo incorporates a K&N famous cotton gauze filter which is removable for periodic cleaning and provides the benefits of an open cone filter and standard air box in one unit. Heat build up is reduced which keeps the intake charge cool. Smooth internal features minimize air turbulence and maximize air flow. The Apollo is ideal for normally aspired engines up to 250BHP and turbo engines up to 350BHP. It comes with a standard 70mm base flange with a range of optional stepped adapters available to allow fitment to other intake sizes.

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.