K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake
K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake

K&N 14-15 VW Jetta GLI 2.0L-L4 Typhoon Intake

KNN69-9507TTK

Regular price USD $399.99

/
Shipping calculated at checkout.

The K&N 69-9507TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Volkswagen Jetta, Jetta GLi and Passat models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration. Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through two coupled intake tubes into the engine's turbo inlet for a guaranteed power gain. The intake tubes have an attractive black powder-coated finish that's made to last and they accommodate the factory air injection hose and vacuum line. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set, pliers and several wrenches.

This Part Fits:

Year Make Model Submodel
2015 Volkswagen Jetta Base
2014 Volkswagen Jetta GLI
2015-2016 Volkswagen Jetta GLI SE
2015-2016 Volkswagen Jetta GLI SEL
2014-2015 Volkswagen Jetta S
2014-2015 Volkswagen Jetta SE
2014-2016 Volkswagen Jetta SEL
2016 Volkswagen Jetta SEL Premium
2015-2016 Volkswagen Jetta Sport
2014 Volkswagen Jetta TDI
2014 Volkswagen Jetta TDI Premium
2015 Volkswagen Jetta TDI S
2015 Volkswagen Jetta TDI SE
2015 Volkswagen Jetta TDI SEL
2015 Volkswagen Passat Limited Edition
2016 Volkswagen Passat R-Line
2015-2016 Volkswagen Passat S
2015-2016 Volkswagen Passat SE
2016 Volkswagen Passat SEL
2015-2016 Volkswagen Passat SEL Premium
2015 Volkswagen Passat Sport
2015 Volkswagen Passat Wolfsburg Edition

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.