K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake
K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake

K&N 00-04 VW Golf Jetta 1.8T Typhoon Intake

KNN69-9501TP

Regular price USD $399.99

/
Shipping calculated at checkout.

The K&N 69-9501TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-9501TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The intake tubes have an attractive chrome-like finish that's made to last. The cold-air intake system accommodates the factory mass air sensor and air injection hose (on vehicles equipped with air injection). The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

This Part Fits:

Year Make Model Submodel
2000-2005 Volkswagen Golf GL
2000-2005 Volkswagen Golf GLS
2002-2005 Volkswagen Golf GTI 1.8T
2003 Volkswagen Golf GTI 20th Anniversary
2002 Volkswagen Golf GTI 337
2001 Volkswagen Golf GTI GLS
2000-2004 Volkswagen Jetta GL
2004 Volkswagen Jetta GLI
2000-2004 Volkswagen Jetta GLS
2001,2003 Volkswagen Jetta Wolfsburg Edition

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.