Skip to content
Increase horsepower by 60hp* with a simple reflash!
-
Increase of 60 HP*
-
Increase of 50 ft-lbs of Torque*
-
Volkswagen Factory Safety Limiters Retained
-
Able to adjust timing and fuel for different fuel grades. No "switchable" program needed
-
Developed on our Superflow AWD dyno and tested on the road for peak performance and ultimate drivablity
*NOTE: Premium fuel neeeded. Gains may vary depending on octane and region. Some fuels have additives which directly affect performance even if octane number is high.
Note:
You will need an HPA ONEPort to install this flash file. The ONEPort, is an OBD-II to USB device, allows the end user to extract critical ECU ID information, which can then be e-mailed to us for analysis and modification. Once a specific tune file is completed here in our offices, the updated file is then e-mailed back to the customer for upload into the vehicle. This process can take 1 to 2 business days and in some cases longer depending on your file version. Please contact us once you've made your purchase.
Each ONEPort device can only be paired to an individual VIN number, and therefore is owned by the user once purchased (it is not a loaner tool). However, the ONEPort can also be used for DSG / S-tronic programming in the same vehicle, if applicable.
HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components. Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.
Warranty is offered to original purchaser only and is not transferable.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
Labour and freight costs associated with warranty repair or replacement are NOT covered.
To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.
In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:
Components covered by warranty include:
- Turbochargers
- Exhaust Manifold
- Downpipe
- Catalysts
- Exhaust System
- Intake Manifold
- Silicone Plumbing
- Intercoolers
- Fuel Pump
- Fuel Injectors
- Brake Calipers
- Haldex Controller
Components NOT covered by warranty include:
- Clutch
- Gearbox
- Brake Pads & Brake Rotors
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.
To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:
| Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed | 1000 km / 620 miles |
| Mass Air Flow meter – Clean | 5000 km / 3100 miles |
| Mass Air Flow meter – Replace | 20,000 km / 12,500 miles |
| Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace | 5000 km / 3100 miles |
| Haldex Fluid & Filter – Replace | 10,000 km / 6000 miles |
Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair.
For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.
Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure. Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.
United StatesVery rad
Switched%20from%20Unitronic%20stage2%20to%20HPA%20stage2+.%20What%20a%20drivable%20difference%20in%20just%20all%20around%20city%2Fback%20roads.%20Delivery%20of%20top%20end%20power%20is%20much%20smoother.%20%0D%0A%0D%0AHave%20had%20the%20tune%20file%20for%20about%2020k.%20My%20favorite%20part%20so%20far%20is%20the%20addition%20of%20water%20meth%20at%20the%20throttle%20body%20for%20octane%20boost%20and%20I%20don%E2%80%99t%20have%20to%20switch%20between%20files%20to%20use%20it.%20I%20can%20simply%20turn%20in%20on%20and%20have%20my%20fun%2C%20turn%20it%20off%20and%20go%20back%20to%20my%20normal%20driving.%20%0D%0A%0D%0AI%E2%80%99ve%20had%20additional%20questions%20on%20my%20journey%20that%20HPA%20has%20been%20super%20helpful%20with.%20Very%20pleased%20I%20switched%20and%20very%20please%20with%20my%20purchases.%20
Awesome
I brought my 2013 golf R in for a tune with their HPA downpipe install. Power increase is amazing, despite the fact that (because i cant get the best fuel in my area) they de-tuned it slightly for my Canadian 91 octane gas. The best part of my experience with HPA so far has been the additional follow-up support I've received whenever i have questions or concerns. They stand behind their products and I really appreciate their help.
