GFB 06-08 Volkswage/Audi 2.0T Super Lightweight Non-Underdrive Crank Pulley Suits
GFB 06-08 Volkswage/Audi 2.0T Super Lightweight Non-Underdrive Crank Pulley Suits
GFB 06-08 Volkswage/Audi 2.0T Super Lightweight Non-Underdrive Crank Pulley Suits
GFB 06-08 Volkswage/Audi 2.0T Super Lightweight Non-Underdrive Crank Pulley Suits
GFB 06-08 Volkswage/Audi 2.0T Super Lightweight Non-Underdrive Crank Pulley Suits

GFB 06-08 Volkswage/Audi 2.0T Super Lightweight Non-Underdrive Crank Pulley Suits

GFB2012

Regular price USD $180.00 Sale price USD $162.00 Save USD $18.00

/
Shipping calculated at checkout.

It might be hard to imagine how reducing the mass of a pulley makes a car go faster, but accelerating a heavy factory pulley from say 3000-7000 RPM in a second or two saps a measurable amount of torque. GFB Lightweight Pulleys reduce inertia by up to 85 percent, so most of the torque that used to accelerate the pulley can now be applied to the wheels.

This Part Fits:

Year Make Model Submodel
2006-2012 Audi A3 Base
2010-2013 Audi A3 TDI
2015-2016 Audi A3 TDI Premium
2015-2016 Audi A3 TDI Premium Plus
2015-2016 Audi A3 TDI Prestige
2008-2009 Audi TT Base
2007-2012 Volkswagen GTI Base
2007 Volkswagen GTI Fahrenheit
2006-2007 Volkswagen Jetta 2.0T
2006-2009 Volkswagen Jetta GLI
2009 Volkswagen Jetta SEL
2009-2011 Volkswagen Jetta TDI
2010 Volkswagen Jetta TDI Cup Edition
2008-2010 Volkswagen Jetta Wolfsburg Edition

HPA branded products carry a one year warranty against manufacturer's defects on all major, non-consumable, components.  Damaged caused by incorrect installation, wear and tear, abuse, misuse, racing, collision, foreign particles, etc., will NOT be covered by warranty.

Warranty is offered to original purchaser only and is not transferable.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind.  HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option. 

Labour and freight costs associated with warranty repair or replacement are NOT covered.

To maintain validity of warranty, factory recommended maintenance schedule and manufacturer’s Technical Service Bulletins (TSB’s) must be adhered to and documented.

In addition to the above, the HPA FT/FTX series Turbo packages for VR6 motors have the following conditions:

Components covered by warranty include:

  • Turbochargers
  • Exhaust Manifold
  • Downpipe
  • Catalysts
  • Exhaust System
  • Intake Manifold
  • Silicone Plumbing
  • Intercoolers
  • Fuel Pump
  • Fuel Injectors
  • Brake Calipers
  • Haldex Controller

Components NOT covered by warranty include:

  • Clutch
  • Gearbox
  • Brake Pads & Brake Rotors

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, Canada. Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. In certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

HPA Motorsports will not be liable for incidental, consequential, indirect, special, or punitive damages of any kind. HPA’s entire liability shall be limited to replacement or repair of the damaged parts at HPA’s option.

To maintain validity of warranty, in addition to the factory recommended maintenance schedule, the following services must be adhered to and documented according to the prescribed schedule:

Break In period: engine speed is not to exceed 5500 RPM, and absolutely NO standing starts are to be performed 1000 km / 620 miles
Mass Air Flow meter – Clean 5000 km / 3100 miles
Mass Air Flow meter – Replace 20,000 km / 12,500 miles
Engine Oil (Motul Xcess / 8100 5w40) & Filter – Replace 5000 km / 3100 miles
Haldex Fluid & Filter – Replace 10,000 km / 6000 miles

Any claims of defect in workmanship must be repaired at HPA Motorsports' facility located in Langley, BC Canada.  Should the damage be determined to be a direct result of the workmanship of HPA Motorsports, labor costs for HPA Motorsports to complete repairs at our own facility will be included in the warranty repair. 

For remote customers, in certain circumstances, at the sole discretion of HPA Motorsports, permission may be granted for repairs to be completed at an HPA authorized facility at a pre-approved labor rate.

 

Should you experience any issues with your items, please contact HPA Motorsports for technical assistance using the form below or by calling 604-888-7274 prior to engaging in any repair procedure.  Failure to follow the advice of our technical support staff may cause undue harm that will not be covered by warranty.